Publicité
250
22. Sett ing the presser foot pressure
The presser foot pressure is set correctly for all common sewing tasks as
standard and does not need to be adjusted.
If it nevertheless becomes necessary to adjust the pressure of the presser
foot, you can regulate this using the setting screw for the presser foot pres-
sure (28) on top of the machine.
7. Hold the handle up and guide a small screwdriver into the setting
screw opening.
8. Turn the screw clockwise to increase the pressure or anti-clockwise
to decrease the pressure.
To restore the default setting, turn the screw clockwise until it strikes the
upper cover. Then turn the screw anti-clockwise for 6 rotations. The default
setting has now been restored.
23. Free arm
For sewing work on tubular material, such as sleeves or trouser legs, the
attached work table can be removed to use the free arm.
The work table is removed by pushing it carefully to the left.
To attach the work table, carefully place the extension table onto the
machine and push it to the right until it audibly clicks into place.
Publicité
