Publicité
6.4. Spool holder
Both industrial and domestic spools can be used on this machine.
For large-diameter industrial spools, use the spool holder (33) with the
wide end upwards; for small-diameter spools, use the spool holder with
the narrow end upwards.
Spool holder
Spool cap
Spool pin
In any case, use the spool cap (51) to ensure stability of the spool.
6.5. Connecting the foot control
Connect the coupling connector for the supplied foot control to the
connector housing (36) on the machine and then plug the mains plug
into the socket.
Mains switch
The mains switch (37) switches on both the machine and the sewing light.
Use only the supplied foot control.
After finishing work or before maintenance work, always switch off the ma-
chine and pull the mains plug from the socket.
Mains plug
Foot control
Coupling
connector
Connector
housing
ON
DE
FR
NL
ES
IT
EN
OFF
225
Publicité
