Publicité
244
17. Narrow and wide chainstitching with
three threads
This machine can be converted from chaining four to three threads.
Remove either the left or right needle (depending on the required
seam) and the corresponding thread (see also "24. Replacing needles"
on page 251).
The machine is now ready for chaining with three threads.
If only the right needle is used, the cutting width can be adjusted between
3–4.5 mm.
If only the left needle is used, the cutting width is between 5.2–6.7 mm.
3.0mm
4.5mm
5.2mm
6.7mm
Publicité
