Publicité
Foot control
226
6.6. Mounting of the waste container
The waste container collects cut material when sewing, so that your work-
space remains clean.
Hook the tabs (A) into the two upper openings (B).
Then gently press the tabs (D) (not shown) into the slots (C).
Once the sewing work is complete, remove the waste container by careful-
ly pulling the bottom part of the waste container off the machine and then
lifting the tabs (A) out of the openings (B).
B
C
A
D
7. Operation
7.1. Handwheel
Always turn the handwheel (9) towards you.
7.2. Controlling the sewing speed
The sewing speed is controlled using the foot control (62). This means that
the sewing speed can be changed by exerting more or less pressure on the
foot control.
7.3. Looper cover and safety switch
This machine is equipped with a micro safety switch. Operation is shut-off
when the looper cover (13) is opened.
To open the looper cover, pull the cover to the right and fold the cover
forward.
Close the looper cover before beginning to sew.
B
C
A
Publicité
