Publicité
230
7. From this point, follow the thread guide diagram in the machine and
thread the thread into the four coloured thread guides (44). (Fig. C)
8. Now place the thread over the lower looper and push the thread
back onto the looper using the tweezers until the thread is in the
rear eye of the looper. (Fig. D)
9. Thread the thread into the eye of the lower looper from the front.
(Fig. E)
Fig. D
10. Pull the end of the thread approx. 10 cm through the looper eyes and
place the thread to the back under the presser foot.
Fig. E
Publicité
