Publicité
8.3. Threading the upper looper
1. Guide the thread through the eyes on the telescopic thread guide.
(Fig. F)
2. Lift the handle and guide the thread under the handle and tension
the thread into the rear thread guide for the upper looper (26).
3. Place the thread between the two discs on the thread tensioner (7).
Fig. F
Fig. G
9
4. Insert the thread into the left guide nose of the thread guide for the
looper threads. (Fig. G)
5. From this point, follow the thread guide diagram in the machine and
thread the thread into the three coloured thread guides (43).
6. To thread the thread into the upper looper (42), turn the handwheel
until the looper is in a favourable position.
7. Pull the end of the thread approx. 10 cm through the looper eyes and
place the thread to the back under the presser foot.
8. After threading, close the looper cover.
1
2
3
4
5
8
7
6
3
231
DE
FR
NL
ES
IT
EN
Publicité
