Publicité
Standard setting
1. Turn the info button until the menu item "Standard set-
ting" is shown in the display.
2. Press the info button.
3. Turn the info button until the desired accessory is high-
lighted.
4. Press the info button to confirm ON/OFF.
5. Press the info button to exit the menu.
6. Switch the device off and on again to adopt the setting.
Setting the language
1. Turn the info button until the menu item "Language" is
shown in the display.
2. Press the info button.
3. Turn the info button until the desired language is marked.
4. Press the info button.
Switch menu
The following functions are switched on and off via the
"Switch menu":
● Detergent dosing*
● Flashing beacon/ spotlight*
● Side brush spray nozzles*
● Spray suction
● Work lights
● Tank rinsing
The "Switch menu" is available in all program switch posi-
tions, except "OFF".
1. Press the Info button.
The "Switch menu" is displayed.
2. Press the Info button.
The list of functions available in the device is displayed.
3. Turn the info button until the desired function is high-
lighted.
4. Press the info button to change the switch state.
5. Turn the info button until "Exit menu?" is displayed.
6. Press the info button.
* Optional
Set maximum travel speed
1. Turn the info button until the "Travel speed" menu item
appears on the display.
2. Press the Info button.
3. Turn the info button until the desired maximum speed is
highlighted.
4. Press the Info button.
Factory setting
The factory settings of all parameters are restored (except
transport travel speed).
1. Turn the info button until the menu item "Factory setting"
is displayed.
2. Press the info button.
3. Turn the info button until "Yes" is highlighted.
4. Press the info button.
Adjusting parameters for cleaning programs
All cleaning program parameters are retained until another
setting is selected or the device is switched off.
1. Set the program switch to the desired cleaning program.
2. Press the Info button.
The first adjustable parameter is displayed.
3. Press the Info button
The set value flashes.
4. Set the desired value by turning the info button.
5. Confirm the changed setting by pressing the Info button
or wait until the set value is automatically accepted after
10 seconds.
6. Select the next parameter by turning the info button.
7. After changing all desired parameters, turn the info but-
ton until the menu item "Exit menu?" is displayed.
8. Press the info button.
The menu is exited.
Parameter changes made in the individual cleaning pro-
grams during operation are reset to the standard setting
when the device is switched off.
1. Turn the info button until the menu item "Standard set-
ting" is shown in the display.
2. Press the info button.
3. Turn the info button until the desired cleaning program
is highlighted.
4. Press the Info button.
5. Turn the Info button until the desired parameter is high-
lighted.
6. Press the Info button.
The set value flashes.
7. Set the desired value by turning the Info button.
8. Press the Info button.
Yellow Intelligent Key
The yellow Intelligent Key authorizes functions that are re-
quired for the cleaning task.
The parameters for the various cleaning programs are pre-
set in the device. Individual parameters can be changed
depending on the authorization of the yellow Intelligent
Key.
The display texts for parameter settings are largely self-ex-
planatory.
"FACT" parameters (only available with R cleaning head):
● "Fine Clean": Low brush speed for removing gray film
from fine stone.
● "Whisper Clean": Medium brush speed for maintenance
cleaning with reduced noise level.
● "Power Clean": High brush speed for polishing, crystal-
lizing and sweeping.
Authorization management
● General access with the Intelligent Key
● Working speed
● Brush speed
● Suction
● Contact pressure
● Water quantity
● Detergent dosage
● RAB/Blue Spot
● Spray suction
● Tank rinsing
1. Select the "Key menu" with the info button.
2. Confirm "access" by pressing the info button.
3. Define the other accesses and activate and confirm
them with the info button.
4. Press "Save?" with the info button to confirm and save
the settings you have made.
English
Standard setting
21
Publicité
