Publicité
4. Place one lock washer in each of the bores for the screws.
5. Tighten the screws using the T20 Allen key supplied (torque: 2 Nm).
6. Set the measuring station in an upright position.
Fitting the column (anthracite)
Proceed as follows to fit the column to the weighing platform:
1. Lie the column on the floor and position the weighing platform as shown in
the diagram.
2. Hold the weighing platform steady.
3. Position the column on the column holder of the weighing platform.
18 • seca 777
Publicité
