Item
Device component
Weighing platform
6
7
Battery compartment
8
Measuring rod
9
Head slide
10
Read-off edge 1
11
Read-off edge 2
12
Lower telescopic element
13
Upper telescopic element
Measuring flap
14
15
Lock
16
Cover panel
Recessed handle
17
USB interface
18
19
Socket for battery connector cable
20
Socket for connector cable
4.2
Display unit
Item
Control
1
2
For weighing patients
Takes batteries (type AA/1.5 V)
For measuring height
For sliding the measuring flap onto the lower telescopic element
For heights < 1.22 m, the measuring result is read off under the head slide
For heights > 1.22 m, the measuring result is read off the upper edge of
the lower telescopic element
For measuring height < 1.22 m
For measuring height > 1.22 m
Head stop for measuring height
For releasing and locking the head slide
For covering the cables
For transporting the measuring station
For transmitting the weight values displayed to the customer's software
solution. If you have any questions, contact seca Service.
Used to connect the battery connector cable
Used to connect connector cable
4
3
On/off key
• Switch the device on and off
BMI kg/lbs
key
• During the measurement procedure:
– Activate BMI mode (press key briefly)
– Switch between the units kilograms and pounds (press and hold key) - function depends
on variant
• In BMI mode:
– Confirm value for height and display BMI (press key briefly)
– Exit BMI mode (press key briefly again)
Function
1
2
Function
English
Overview • 11