Publicité
5.3
Disinfecting the device
5.4
Transporting and setting up the device
Transporting the device
22 • seca 777
► Disinfect the following components
in the section entitled "Disinfecting":
– Column and recessed handle
– Display head and display unit
– Measuring rod, head slide with measuring flap
– Weighing platform
– Handrail (optional accessory)
The device has two casters that facilitate transport over short distances.
1. If necessary, disconnect the power supply unit from the power socket and
from the device.
2. Fold down the measuring flap and push the upper telescopic element of the
measuring rod into its lowest position.
3. Take hold of the recessed handle of the device.
CAUTION!
Injury from device falling over
► Hold onto the device firmly when transporting it.
4. Tilt the device until it can be moved freely on the casters.
5. Move the device slowly and carefully over door sills.
6. Transport the device to its new setup location.
initial commissioning as described
before
Publicité
