Télécharger Imprimer la page

Seca 777 Mode D'emploi page 26

Masquer les pouces Voir aussi pour 777:

Publicité

Taring off additional weight
Permanently displaying the
weight (Hold)
26 • seca 777
CAUTION!
Faulty measurement as a result of force shunt
If the patient is in contact with parts other than the weighing platform
during the weight measurement, the device will not measure correctly.
► Ensure that the patient is in contact only with the following parts
during weight measurement: Weighing platform and
handrail (if present).
1. Ask the patient to step onto the weighing platform.
2. Ask the patient to keep still.
3. Read off the measuring result.
Use the
function to prevent an additional weight (e.g. a walking stick) af-
Tare
fecting the patient's weight value.
(Tare)
CAUTION!
Faulty measurement as a result of force shunt
If an additional weight is touching the surface on which the device is
standing, the weight will not be measured correctly.
► Make sure that additional weights are placed only on the weighing
platform.
NOTE
The maximum weight which can be displayed is reduced by the
weight of the objects which have been tared.
1. Place the additional weight on the weighing platform.
2. Press and hold the
3. Wait until the display unit stops flashing and
NOTE
If you remove the additional weight again,
4. Ask the patient to step onto the weighing platform with the additional weight
(or carrying the additional weight).
ð The patient's weight is displayed. The additional weight is deducted auto-
matically.
5. Read off the measuring result.
6. To deactivate the
NET
message is no longer displayed.
NOTE
When you switch the device off, the
matically.
If you activate the
1. Press the
Hold
ð The display flashes until a stable weight is measured.
ð The weight is displayed permanently.
ð The message
2. Read off the measuring result.
3. To deactivate the
 
key until the
Tare
function, press and hold the
Tare
function, the weight value is displayed permanently.
Hold
 
key.
is displayed.
HOLD
function, press the
Hold
seca 477
message is displayed.
NET
is displayed instead.
0.0
will be displayed.
- - - - -
 
key until the
Tare
function is deactivated auto-
Tare
 
key.
Hold

Publicité

loading