Operating The Camera; Night Vision; Night Light - switel BCF 817 Mode D'emploi

5 Operating the Camera

Check the camera and monitor are working properly each time before the equipment is put
into operation.
Switching on the camera
1. Press the On/Off button on the camera.
The On/Off LED lights up green. The camera is now ready to operate.
2. Adjust the camera alignment again, if necessary.
Switching the camera off
Press and hold the On/Off button on the camera until the On/Off LED goes out.

Night vision

The camera is equipped with 6 infrared LEDs. This enables the transmission of pictures from areas
which are not illuminated . The night vision function is activated automatically when the light conditions
make it necessary.
When the night vision function is activated, the display on the monitor turns to black and white.

Night light

The camera is equipped with a night light which provides a soft, steady light to lend a sense of security
for the baby.
S
Press and hold the Night light / Raise volume button until the night light comes on.
S
Press and hold the Night light / Raise volume button until the night light goes out.
Setting the voice volume on the camera
You can speak into the monitor unit and be heard from the camera unit, e.g. to calm the baby or speak
to a person in the room, see Page 68 (Speak function).
Use the Volume buttons on the camera unit to regulate the volume of the voice issued from the cam-
era unit.
S
Press the Night light / Raise volume button to increase the volume.
S
Press the Register / Lower volume in order to lower the volume.
If the volume can no longer be raised or lowered, an acoustic signal is issued each time the
respective Volume button is pressed.
Operating the Camera
67