Temperature Alarm; Playing Lullabies - switel BCF 817 Mode D'emploi

Stopping the alert signal
Press any button on the monitor to stop the alarm signal.
If you do not switch the alarm off, it stops automatically after 1 minute. The aert signal begins again
after 3 minutes and continues for one minute. If the alarm is not stopped manually, the alert sequence
is repeated five times. The number of alert sequences already completed is displayed in the icon bar
in front of the baby bottle icon.
Deactivating the baby feed alert
To deactivate the alert, press the Feed alert / Zoom / Register button on the monitor until OFF" ap-
pears in the icon bar behind the baby bottle icon.

Temperature alarm

45
You can use the menu to set the minimum and maximum temperatures of the room being monitored;
see Menu Structure, Page 62. If the ambient temperature of the room being monitored drops below or
rises above the respective set value, a correspond− ing warning flashes in the display.
The menu can also be used to activate an acoustic signal to alert you to the situation.

Playing lullabies

The baby can go to sleep listening to gentle lullabies. The baby monitor system has 8 different
melodies available which can be played on the camera unit. You can define whether the lullaby
selected should be played just once or continuously repeated.
The lullabies are switched on and off via the menu; see Menu Structure, Page 62.
When a lullaby is being played, a note icon appears in the icon bar with the number of the respective
lullaby.
Defining personal settings on the monitor
Various settings can be defined according to your personal requirements using the menu.
Battery alert signal
46
An acoustic alert signal can be activated to sound when the battery capacity is exhausted; see Menu
Structure, Page 62.
Range alert signal
47
An alert signal can be activated to sound when the camera and monitor are no longer within range of
each other; see Menu Structure, Page 62.
Display brightness
The brightness of the display can be adjusted to one of 5 levels; see Menu Structure, Page 62.
Backlight time
48
Use the Backlight Time" menu option to define how long the monitor display should remain on; see
Menu Structure, Page 62. For reasons of increasing the battery charge time, there are 3 different time
intervals available after which the display automatically goes out (display turns black).
If the display goes out as a result of this setting, simply press the Monitoring/Speak button in
order to restore the image from the camera.
The equipment is provided with voice operated transmission (VOX) which remains active
even when the display is switched off. As soon as the camera unit detects a sound above a
minimum intensity, the display is automatically switched on again.
Operating the Monitor
69