Operating The Transmitter; Switching The Transmitter On/Off; Night Vision Function - switel BCF900 Mode D'emploi

Système de surveillance sans fil a/v

Les langues disponibles

5 Operating the Transmitter

Check the transmitter and receiver are working properly each time before the equipment is

put into operation.

1. Press the Power button (32) briefly. The Power LED (19) lights up green. The transmitter is ready

to operate.

2. To switch the transmitter off, press the Power button (32) for approx. 2 seconds.

Voice operated exchange (VOX)

When the camera activation switch (29) is set to "CAMERA", image and sound are transmitted con-

tinuously. When the switch is set to "AUTO", image and sound are transmitted from a volume of ap-

prox. 50 dB.

There is a slight delay in the transmission before the receiver can reproduce the voice/sound

and picture.

If no voice or sound is detected for more than 30 seconds, transmission is automatically inter-

rupted.

The integrated infrared technology enables image transmission from areas which are not illuminated.

The night vision function is activated automatically when the light conditions make it necessary.

When the night vision function is activated, the image on the LC display turns to black and

white. The image recording area is approx. 2 m.

All manuals and user guides at all-guides.com

Operating the Transmitter

Table des Matières