Preparing The Device - switel BCF 298 Mode D'emploi

Safety instructions
Technical services
The 2.4GHz color LCD A/V monitor should be serviced by qualified technicians when:
- Objects have fallen or liquid has been spilled onto the product
- The units have been exposed to rain
- The units do not operate normally or its performance is sub-standard
- The units have been dropped or the casing damaged
Disposal
In order to dispose of your device, take it to a collection point provided by your
local public waste authorities (e.g. recycling centre). The adjacent symbol indica-
tes that the device must not be disposed of in normal domestic waste! According
to laws on the disposal of electronic and electrical devices, owners are obliged
to dispose of old electronic and electrical devices in a separate waste container.
Packaging materials must be disposed of according to local regulations.
Norms of use
These norms are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions, it may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particu-
lar installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interfe-
rence following one or more of the measures detailed below:
- Reorient or relocate the receiving antenna.
- Place the equipment and receiver at a greater distance.
- Connect the equipment into an outlet on a different circuit to the one that the receiver is con-
nected to.
- Consult the dealer or an experienced radio/TV technician for assistence.
Operation with non-approved equipment or unprotected cables is likely to result in interference to
radio or TV reception. The user is cautioned that changes and modifications made to the equip-
ment without the manufacturer's approval could void the user's authority to operate this equipment.
20

2 Preparing the device

Checking the package contents
The package contains:
1 Camera unit 1 Monitor unit
1 Audio/Video cord 1 Instruction manual
If any of the above are missing, please contact your retailer.
Monitor unit
1 TFT LCD Display
2 Channel indicating LEDs
3 Automatic Channel Scan Indicator
4 LCD On/Off Switch
5 Power On/Off Indicator
6 Channel Selection Switch
7 Brightness Control (+)(-)
8 Speaker
9 DC Jack
10 Audio/Video output
11 Volume control
Camera unit
1 Camera lens
2 Channel Selection Switch
3 Camera /Voice Activation Switch
4 Night Light On/Off/Auto Switch
Note: You can adjust the camera's angle of inclination.
Positioning of the devices
a
Attention: It is essential to read the Safety Information in Chapter 1 before starting up.
Only use the power adapter plug supplied with the equipment!
In case of any question please contact your dealer.
• Install the devices in the respective places.
• Plug of AC adaptor into the DC jack of the unit.
• Plug the AC adaptor into a standard wall AC power socket.
• Switch on the ON/OFF switch. The power indicator will light up.
Preparing the device
2 AC/DC adaptors
5 Power On/Off Switch
6 Power On/Off Indicator
7 DC Jack
8 Microphone
9 Rainbow Night Light
GB
21