Publicité
5.4 Replacing the Blade
The blade replacement is a very easy
operation to perform; follow the instructions
in figure 5.1 below.
The cutting blade of the Robomow should
be
examined
operations. Only use sharp blade.
Replace blade at least once per season or after 200 hours of operation, the first to come. It is
recommended to replace the blade for best performance.
EN
recommended, as a good balance cannot be achieved after machine sharpening.
Robomow has an automatic reminder to replace the blade after every 200 hours of operation.
'Replace blade – every 200 hours' message appears and pressing the 'GO' button will clear the
message and enables the operation of Robomow.
Whenever replacing the blade, it is recommended to restart the counter of the blade replacement
reminder by choosing the 'Blade replaced' option under the 'Settings' menu and pressing the
'GO' button again to clear the reminder.
All manuals and user guides at all-guides.com
for
damage
between
Caution!
To prevent the risk of serious injury,
always remove the battery fuse when
replacing the blade.
For your safety, always wear heavy
work gloves when working with or
around the cutting blade.
Machine sharpening is not
Blade replacement instructions
1. Remove the battery fuse;
2. Wear heavy work gloves;
1 1
3. Place Robomow on its rear side
vertically, lay against a wall or turn it
upside down on a soft surface;
4. To remove blade, using both hands,
squeeze the plastic lock tabs at the
base of the blade (step 1);
Squeeze the plastic locks tabs in the
2 2
arrow direction as shown in step 2.
5. Then pull blade assembly off, away
from mower (step 3);
6. Holding the replacement blade by its
3 3
base, push until it is locked into place.
You will hear a click when it locks.
If you do not hear a click, remove
blade, and repeat the procedure.
Blade replacement
34
Figure 5.1
Publicité
