3M Versaflo S Serie Directives D'utilisation page 11

Installing the Size Reducing Comfort Pad, S-954
An optional size reducing pad (Fig. 16) can be used instead of the standard comfort pad to help improve fit of
the suspension around the brow, top of the head, and around the circumference of the head.
S-950 Premium Suspension Sizing
Head Circumference
(cm)
US Hat Size
with optional size
reducing
S-954 Comfort Pad
with standard
S-953 Comfort Pad
Maximum Optimum
To install the size reducing pad:
1. Remove the standard S-953 comfort pad by gently pulling the pad off the attachment points.
2. Secure the S-954 Size Reducing Comfort Pad to the suspension according to Fig. 17a-d. The two long
slots in the size reducing comfort pad hook over the large top hooks on the premium head suspension
marked with an arrow in Fig. 17a. Use the smaller hooks on the suspension to fully secure the pad as shown
(Fig. 17b-17d).
NOTE: When worn, the two large "spoon" shaped parts of the pad should rest on the top of the head.
Fig. 17a
Fig. 17c
Fig. 16
50 51 52 53
6 6 6 6
1/4 3/8 1/2 5/8
54 55 56 57
7
6 6 7
3/4 7/8 1/8
Fig. 17b
Fig. 17d
10
58 59 60 61
7 7 7 7
1/4 3/8 1/2 5/8
62 63 64
8
7 7
3/4 7/8