Publicité
MN008401A01-AH
Chapter 13: Emergency Operation
13.11.3
Sending Remote Emergency from Menu Feature
Launcher
Procedure:
1. From the Menu Feature Launcher widget, tap
Your radio displays the Call List.
2. Select the required contact.
3. To send remote emergency, press the PTT button.
Result:
If the ID of the target radio is valid, your radio displays Sending remote emergency... and saves the ID
as the last Remote Emergency ID.
If the ID of the target radio is invalid, your radio displays an invalid ID notification.
If your radio is in one of the following states, your radio plays a tone.
●
Receive-only Channel
●
Transmit Inhibit
●
Out of Range
●
Imbalance Coverage
If your radio does not receive acknowledgment from the target radio, your radio displays a no-
acknowledgment notification.
13.11.4
Receiving Remote Emergency
When you receive a remote emergency notification, the display shows Emergency mode and home display
alternately. The receiving radio displays Remote Emergency.
Procedure:
1. To view notification, drag down the Status Bar to open the Notification Center.
2. To exit Emergency mode, tap CANCEL → YES.
Canceling Emergency mode dismisses Emergency notification, and your radio returns to normal
operation.
Result:
If the receiving radio receives the command, the following indications occur:
●
A positive indicator tone sounds.
●
The display shows a positive notification.
If the receiving radio is on a channel with no emergency configured, your radio displays No Emergency.
NOTE: Some features are unavailable when your radio is in Emergency mode.
76
Remote Emergency.
Publicité
