Publicité
MN008401A01-AH
Chapter 8: General Radio Operation
8.2.1
Toggling the Scan Feature On and Off
Procedure:
Perform one of the following actions:
Option
8.2.2
Making a Dynamic Priority Change (Conventional Scan
Only)
While the radio is scanning, the dynamic priority change feature allows you to temporarily change any
channel in a scan list (except for the Priority-One channel) to the Priority-Two channel. This change remains
in effect until scan is turned off. Scan then reverts to the default setting.
Procedure:
From the Home screen, tap
8.2.3
Deleting Nuisance Channels
If a channel continually generates unwanted calls or noise (termed "nuisance" channel), you can temporarily
remove the unwanted channel from the scan list. This capability does not apply to priority channels or the
designated transmit channel.
Procedure:
From the Home screen, tap
8.2.4
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, perform one of the following actions:
●
Stop and restart a scan.
●
Mode change to another channel and back to the original channel.
●
Turn off the radio and then turn it on again.
54
Actions
To turn on Scan, turn the preprogrammed 2–Position Concentric
switch to the scan position.
a. From the Home screen, tap
b. To toggle the scan feature on and off, tap
.
Nuis Del.
Radio Quick Settings.
Scan.
Publicité
