Publicité
Chapter 8
General Radio Operation
This chapter explains the general operations of your radio.
8.1
Scan Lists
Scan lists are created and assigned to individual channels or groups. Your radio scans for voice activity by
cycling through the channel or group. The sequence of scan is as specified in the scan list for the current
channel or group.
Your radio supports different types of Scan Lists:
●
Conventional Scan List
●
Multi-System Talkgroup Scan
●
Trunking Priority Monitor Scan List
8.1.1
Intelligent Priority Scan
This feature allows you to add or delete conventional channels and trunking talkgroups from multiple systems
into the priority scan lists.
When the radio locks onto a channel in the Intelligent Priority Scan list, the radio scans for higher priority
member within the same Trunking or Conventional system.
8.1.2
Managing the Scan List
Procedure:
1. From the Home screen, tap
2. Tap Scan List or Channels.
3. Tap the required channel and perform one of the following options:
●
To assign Priority-One status to the channel, select Priority 1.
●
To assign Priority-Two status to the channel, select Priority 2.
●
To remove priority from this channel, select No Priority.
●
To remove the channel from the scan list, select Remove from Scan.
●
To add the channel to the scan list, from the Channels tab, select Add to Scan List.
8.2
Scan
This feature allows you to monitor traffic on different channels by scanning a programmed list of channels.
Scanning is halted if you initiate a call and resumes when the call has ended.
Scan List.
MN008401A01-AH
Chapter 8: General Radio Operation
53
Publicité
