Publicité
MN008401A01-AH
Chapter 6: Home Screen
2. Log on to CommandCentral using the MFA PIN.
3. At the Session Lock screen, tap CREATE PIN.
4. Enter your new PIN number based on the requirements and tap
5. To verify the PIN number, reenter your PIN number and tap
Result: When your Session Lock PIN is successfully created, the radio displays a positive notification.
6.1.8.4
Unlocking Session Lock
Procedure:
1. From the Home screen, tap on any session locked apps.
2. Enter your current PIN number and tap
NOTE: A total of five attempts is given to enter the PIN correctly. If this limit is exceeded, you are
logged out of CommandCentral, and you must create a new Session Lock PIN.
When the correct Session Lock PIN is entered, your home screen returns to the unlocked state.
6.2
Status Indicators
This section explains the status indicators of the radio.
6.2.1
Battery Charge Status
Your radio indicates the battery charge status through LED, sounds, and the battery icon on the display. You
can also check the battery charge status by using the menu entry.
Table 9: Battery Charge Status Indicator
Top Display Icon
Battery Protection is activated when the battery is low or operating in extremely low temperatures to extend
radio communication. Features such as Wi-Fi and LTE are temporarily suspended.
46
.
Description
76 - 100% Battery level
51 - 75% Battery level
26 - 50% Battery level
0 - 25% Battery level
NOTE: The icon blinks and a chirping tone sounds when the
battery level drops to 25% or lower.
.
.
Publicité
