Publicité
MN008401A01-AH
Chapter 8: General Radio Operation
8.5
Selecting Channels
Procedure:
Use one the following methods to select a channel:
If...
8.5.1
Channel Error Messages
If there is a channel error, your radio displays error messages on the Radio Control Widget.
Type
Unprogrammed
Fail 001
8.6
Managing Mode Select Menus
The Mode Select feature allows you to save the current zone and channel on your radio to one of the Mode
Select feature menus (M01–M05) in the Menu Feature Launcher screen or a programmable side button
(MS01–MS13). After that, the menus on the Home screen function as shortcuts to the saved zone and
channel.
Prerequisites: Navigate to the zone and channel that you want to save.
Procedure:
1. From the Home screen, tap
2. Perform one of the following actions:
●
To save the current zone and channel to one of the Mode Select menus, tap and hold the desired
Mode Select menu.
●
To change to the preset zone and channel of the Mode Select menu, tap the Mode Select menu.
If you tap and hold the Mode Select menu, when the Preconfigurable Preset Zone and Channel
field is disabled, the radio displays the Feature not allowed error message.
56
Then...
Rotate the Channel Selector to the required position.
a. From the Home screen, tap the Radio Control Widget.
b. Perform one of the following actions:
i.
On the Channel tab, select the required channel.
ii. On the Recents tab, select the recently used zone and
channel.
Description
The mode is set to an unprogrammed channel.
The selected channel is assigned to an incorrect frequency band.
More.
Publicité
