Publicité
See
Programmable Features
Procedure:
1. From the Home screen, tap
2. Tap
Info → Control Map.
9.3
Checking Device Status
Procedure:
1. From the Home screen, tap
2. Tap My Device.
9.4
Failure Detections
The radio conducts failure detection tests from the moment that the radio is turned on until it is turned off.
Table 11: Failure Detection Tests
Failure Detection Tests
Antenna Failure
RSM Failure
Continuous Over Temperature
Cumulative Over Temperature
for more information on the various programmable features of your radio.
More.
System Settings.
Chapter 9: General Radio Information
Description
Detects that the antenna is properly attached.
●
Detects when the communication with the RSM
fails, or when the RSM is detached.
●
Detection occurs in Hazard Zone Mode or Non-
hazard Zone Mode.
●
Detects on Hazard Zone Mode RSM or adapter
only.
Detects when the radio is exposed to high temper-
ature for more than 30 seconds.
Detects when the radio is exposed to high temper-
ature for more than 10 minutes.
MN008401A01-AH
59
Publicité
