Publicité
Chapter 40
Zone-to-Zone Cloning
Zone Cloning clones conventional zones from one radio to another.
You can select the followings zones from a source radio and clone them into a target radio.
●
Clone enabled zones
●
Dynamic Zones
●
Multiple Private Line (MPL)
You can clone the zones by connecting the source radio and target radio with a clone cable. The target radio
must be digital, band, and FCC mandate compatible with the source radio.
40.1
Cloning Zones
Procedure:
1. Connect the source radio to the target radio with a clone cable.
2. On the source radio, from the Home screen, tap
When the source radio is connected to the target radio, a Connected notification appears.
3. Tap the source zone that you want to clone.
4. Tap the required target zone.
5. Tap
Done → CONTINUE.
6. Enter your authorized PIN number and tap
Result: If the zone cloning is successful, the display on the source radio shows a positive notification.
Chapter 40: Zone-to-Zone Cloning
More → Zone Cloning.
Done.
MN008401A01-AH
131
Publicité
