Publicité
2. Tap
Done to confirm.
NOTE: If you leave the Soft ID empty, the Work Manager Widget displays the Radio Alias ID if
it is enabled.
6.1.4
Multi Factor Authentication PIN
The Multi Factor Authentication (MFA) PIN feature allows you to enroll your radio and log on to
CommandCentral without using a username and password. Using the MFA PIN shortens the logon and
authentication process. The CommandCentral Administrator can enable the MFA PIN feature for your radio.
6.1.4.1
Creating Your MFA PIN
Prerequisites: Enable the Multi Factor Authentication (MFA) PIN for your radio through the CommandCentral
Administrator.
Procedure:
1. After you are authenticated, at the MFA screen, tap CREATE PIN.
If you choose SKIP PIN, you can create a PIN later by going to Shift Manager Launcher → PIN
Settings → Create PIN.
2. Tap the Tap to enter PIN field.
3. Enter your preferred PIN number based on the requirements and tap
4. To verify the PIN number, reenter your PIN number and tap
Result: When your MFA PIN is successfully registered, the radio displays a positive notification.
6.1.4.2
Changing Your MFA PIN
You can change your Multi Factor Authentication (MFA) PIN at any time. The MFA PIN is valid for one year by
default. When you change your MFA PIN, the PIN validity resets to start at the date and time when the PIN is
successfully changed and registered.
Procedure:
1. From the Home screen, tap Shift Manager Launcher.
2. Tap PIN Settings → Change PIN.
3. Tap the Tap to enter PIN field.
4. Enter your current PIN number and tap
5. Enter a new PIN number and tap
6. To verify the new PIN number, reenter the PIN number and tap
Result: When your new MFA PIN is successfully registered, the radio displays a positive notification.
.
.
MN008401A01-AH
Chapter 6: Home Screen
.
.
.
41
Publicité
