8.G MANUAL EQ
12 dB High pass
Allows you to define a high pass filter with a raw slope of 12dB/Oct. The
cutoff will be firmer, few frequencies transmit below the defined frequency.
May be useful for protecting the speaker at low frequencies or limiting the bass
produced to compensate for problems related to your environment or room.
We took an example with a 60Hz filter protecting your speakers and li-
miting the bass frequencies in your environment; this type of filter
is recommended for small rooms. You can also change the Q (coef-
ficient), allowing you to adjust the curvature at the cutoff frequency.
It is also possible to set a filter around 120Hz if your speakers are coupled with
a subwoofer.
EN
94