Publicité
10. CONNECTING SOURCES WITHOUT STEREO HUB
10.A
RCA INPUT BY RCA CONNECTION
Use the "pre-amp" output of the integrated amplifier or the "amp" output of your preamp: Connect the
RCA cables from the source to the "Line IN" input of the speakers. The red RCA corresponds to the right
speaker, black or white RCA corresponds to the left speaker. Your system is then ready to operate. In this
configuration the EQ settings will no longer be active from the application.
EN
110
Votre source doit avoir une gestion du volume
intégrée afin d'en avoir le contrôle.
DROITE
RIGHT
USER MANUAL
Publicité
