Publicité
10.B
INPUT WISA CONNECTION
Some sources, such as TV/Streamer/Console, offer you a WISA connection. You can then do without the
Stereo Hub and directly connect your source to your speakers.
Connect your speakers using the power cables provided.
The STATUS LED
•
1 orange flash
•
Then lights up in blue
Wait for the STATUS LED (rear) to turn off. This may take up to 1 minute.
Press the "PAIR" button on each of the speakers for 3 to 4 seconds, then wait for the LEDs to turn on. start
to flash orange quickly.
Press the "PAIRING" button on your source once
Pairing is validated once the LEDs of the 2 speakers remain lit continuously
By default, your speakers are set as Left voice, to restore stereo see p.24
Your source must have built-in volume
management in order to have control over it.
DROITE
RIGHT
USER MANUAL
111
EN
Publicité
