Publicité
9.B
BLUETOOTH CONNECTION
Sampling: 48kHz/16bits
This connection allows you to send music wirelessly using generation 4.2 Bluetooth technology..
These speakers allow you to listen to music from any source with Bluetooth: phone, tablet, computer, etc.
For this purpose :
A
C
Turn your CAPELLA speakers on by pressing ON on your remote control.
Select the Bluetooth input using the horizontal arrows (A) on your remote control. The indicator light in
front of "BT" should light up white (B).
Search your Bluetooth device (consult its user manual if necessary), and look for the device "StereoHub_
XXX" or the name defined when setting up Wi-Fi, then connect to it.
Thanks to the CAPELLA remote control, when using Bluetooth, you can change tracks, play or pause them.
You can vary the volume of CAPELLA from your Bluetooth source using the physical buttons on your device
or directly from the music application used.
When connecting a Bluetooth device that has a volume control, pay attention to the volume level. Too low
a level will make the CAPELLA speakers inaudible. We advise you to position the volume of your Bluetooth
device at three-quarters and the speaker volume to minimum, to start modulating with the CAPELLA
remote control.
A Bluetooth network hiding function is possible so that your neighbors cannot connect to it:
Press "previous" (C) for 3 seconds.
To make it reappear, press "next" (D) for 3 seconds.
This operation can also be done from the application, or you can also disconnect your source:
EN
106
B
D
Publicité
