Télécharger Imprimer la page

Triangle CAPELLA Mode D'emploi page 63

Masquer les pouces Voir aussi pour CAPELLA:

Publicité

1. INSTALLATION PRECAUTIONS / WARNING
INSTALLATION PRECAUTIONS
Before the installation
Before making any connections, turn off the devices. Be sure to always set the active speaker switch
to OFF before removing or plugging connection cables. Do not plug in the power cord before all
connections are made.
Moving the device
Always remove the power cord and disconnect the cables between all components when moving
the device. This will prevent a short-circuit or the damage to the plugs or connection cables.
Before turning on the device
Check one last time if all the connections are correct.
Locations to avoid
Install your speakers in a temperate place and avoid humid locations or direct sunlight.
Recycling
Protection of the environment: your products contain valuable materials which can be recovered or
recycled. Take them to the appropriate collection points.
CAUTION
Use the product in the environment with the temperature between -10°C/ 14°F and 40°C/104°F; otherwise, it may
damage your product.
For the following equipment
Product name: CAPELLA speaker Brand: TRIANGLE
TRIANGLE Hi-Fi (Email: capella@trianglehifi.com) declares that this product CAPELLA, Models: CAPELLA: TEA8_BL,
TEA8_BU, TEA8_BW, TEA8_BX, TEA8_BY, TEA8_BZ, TEA8_CA
Test compliant with the Radio Equipment Regulations 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696).
The full text of the UK declaration of conformity is available at this internet address: https://www.trianglehifi.fr/pages/
declaration-conformite-uk
The RF distance between the body and the product is 0mm.
Bluetooth version: Bluetooth V4.2 (Only EDR) Frequency range: 2402-2480MHz Maximum RF output power: 4dBm (EIRP)
2.4GHz
Frequency Range: 2464MHz Receiving
63
EN

Publicité

loading