Publicité
9.C
OPTICAL CONNECTION
Sampling : 192kHz/24bits
The 3 optical inputs allow you to connect all audio devices with an optical output to your speakers: TV, CD
player, DVD player, etc. To do this:
Connect your optical cable to the back of the Stereo Hub to your device in the "OPTICAL" location.
In your device settings, set the sound output to PCM (Stereo).
Select the optical input using the horizontal arrows (A) on your remote control. The indicator light in front
of "OPTI" should light up white (B)
Your system is then ready to operate.
9.C
COAXIAL CONNECTION
Sampling : 192kHz/24bits
The coaxial input allows you to connect all audio devices with a coaxial output to your Stereo Hub: CD
player, DVD/Blu-ray player, television, etc. To do this:
Connect your coaxial cable to the back of the Stereo Hub to the "COAX" slot, then to your device.
Select the coaxial input using the horizontal arrows (A) on your remote control. The indicator light in front of
"COAX" should light up white (B)
Your system is then ready to operate.
9.C
JACK 3.5 / OPTIC CONNECTION
Sampling : 192kHz/24bits
The auxiliary input allows you to connect different devices with a mini-Jack (3.5) or optical to your speakers:
smartphone, audio player, tablet, computer, television, etc. To do this:
Connect the Jack connector to the "AUX" input then the other end to your device.
Select the Auxiliary input using the horizontal arrows (A) on your remote control. The indicator light in front
of "AUX" should light up white (B)
Your system is then ready to operate.
EN
108
USB-A
USB-C
USB-A
USB-C
SPDIF
USB-B
USB-B
COAX IN
AUX IN
USB-B
USB-B
Publicité
