Publicité
9.B
HDMI CONNECTION
Sampling: 192kHz/24bits
A
The TV ARC input allows you to connect your television to your Stereo Hub. For that :
Check that your TV and HDMI cable are compatible with HDMI ARC technology.
Connect your HDMI cable to the back of your Stereo Hub and to the "HDMI ARC" input on your TV.
In your TV settings, set the sound output to PCM (Stereo).
Select the HDMI input using the horizontal arrows (A) on your remote control. The indicator light in front of
"HDMI" should light up white (B).
Your system is then ready to operate.
This connection will allow you to turn on your speakers at the same time as your TV and
control the volume via your TV remote control. Compatibility with CEC functions may
differ depending on your TV model or brand
9.B
USB CONNECTION
Sampling: 192kHz/24bits
A
The USB-B input allows you to connect your Stereo Hub to a computer. You can use a USB-A or USB-C to
USB-B type cable.
Connect the USB cable to the "USB" input of your Stereo Hub then the other end to your computer.
Select the USB input using the horizontal arrows (A) on your remote control. The indicator light in front of
"USB" should light up white (B).
In the computer settings, select the "Stereo Hub" speakers as the audio output.
Your system is then ready to operate.
B
USB-A
USB-A
Ou
USB-C
USB-C
B
By default, the USB input volume is set to the maximum
level. To unlock this function, simply press for 5 seconds.
"Mute" button.
HDMI
USB-B
USB-B
USB-B
USB-B
INPUT
0
ON
30Hz
120Hz
180
OFF
LFE
LINE IN
VOLUME
CROSSOVER
PHASE
AUTO
107
EN
A C T I V E S U B W O O F E R
Publicité
