Publicité
6.A STEREO HUB SETTING UP
1.
3.
4.
1. Insert the batteries into your remote control
using the key provided. Be sure to respect the
polarities indicated.
2. Screw the antenna onto the Stereo Hub.
3. Select the tip corresponding to your mains
socket.
4. Then connect the power cable to your Stereo
reo Hub.
2.
SERVICE
5.
5. The Stereo Hub begins its startup sequence.
This sequence will go like this:
•
WISA LED off for 50 seconds
•
WISA LED flashes
•
WISA LED stays on (if you have already
powered on your speakers) Turning off the
WISA LED (on the back) of the Stereo Hub
will confirm the end of the sequence.
WISA
PAIRING
69
EN
Publicité
