Publicité
6
10. Route the kit supplied violet/white harness (1)
along the fender towards the rear of the engine
compartment.
11. Use the kit supplied tie wraps (2) to secure the har
ness to the existing vehicle harness.
NOTE: Harness routing may vary slightly by model
year.
12. Continue routing the kit supplied harness (1) along the
back of the back of the engine compartment towards
the passenger side. Secure the harness with the kit
supplied tie wraps (2) every 100mm.
13. Route the kit supplied harness (1) around the battery
towards the TIPM. Secure the harness with the kit sup
plied tie wraps (2).
NOTE: Harness routing may vary slightly by
model year.
Publicité
