Mopar K6861135AC Instructions De Montage page 17

42. Remove the one right multi­function switch retaining
screw (3) from the steering column control module
(SCCM) (1).
43. Pull right switch (2) out of SCCM.
44. Disconnect the right switch electrical connector (1)
from the SCCM (2).
45. Remove the WCM mounting screw on the ignition lock
assembly and separate the WCM (1 and 3) from the
ignition lock assembly (5).
46. Disconnect the WCM electrical connector (4).
47. Remove the WCM (1 and 3) from the column (2) and
discard.
17