Mopar K6860550 Instructions D'installation

Masquer les pouces

page de 95

/ 95
Signets

Liens rapides

Télécharger ce manuel

Click on desired vehicle name to take you directly to

that vehicle's specific instructions.

Dodge Avenger / Chrysler Sebring........................ K6860550

Jeep Liberty / Dodge Nitro...................................... K6860550

Dodge Caliber / Dodge Journey ............................ K6860725

Jeep Compass / Jeep Patriot ................................. K6860725

Dodge Charger / Dodge Magnum / Chrysler 300C... K6860285

Jeep Grand Cherokee ............................................ K6860444

Jeep Commander ................................................... K6860444

2006-2008 Dodge Ram - Cloth Bucket Seats Only .. K6860447

2009 Dodge Ram - Cloth & Leather Bucket Seats .. K6860447

Jeep Wrangler......................................................... K6869541

9-30-08

FRONT SEAT HEATERS

For Technical Assistance

™

Call: 800-927-6787

Contents

Sommaire des Matières pour Mopar K6860550

Page 1 Call: 800-927-6787 Click on desired vehicle name to take you directly to that vehicle's specific instructions. Dodge Avenger / Chrysler Sebring......K6860550 Jeep Liberty / Dodge Nitro........K6860550 Dodge Caliber / Dodge Journey ......K6860725 Jeep Compass / Jeep Patriot ......... K6860725 Dodge Charger / Dodge Magnum / Chrysler 300C...
Page 2 DODGE AVENGER / CHRYSLER SEBRING JEEP LIBERTY / DODGE NITRO Front Heated Seats PRINT BACK TO CONTENTS AVENGER / SEBRING .........................PG 2-13 LIBERTY / NITRO ........................PG 14-23 T-50 10mm 15mm 18mm 1/8" 9-29-08 1 of 23 K6860550...
Page 3 DODGE AVENGER / CHRYSLER SEBRING 15mm TORQUE TO 29 ft-lbs (40 N.m) FOR RE-INSTALLATION T-50 TORQUE TO 45 ft-lbs (61 N.m) TORQUE TO 45 ft-lbs (61 N.m) FOR RE-INSTALLATION FOR RE-INSTALLATION 15mm 15mm 9-29-08 2 of 23 K6860550...
Page 4 DODGE AVENGER / CHRYSLER SEBRING “USE ITEM “L” TO REINSTALL 9-29-08 3 of 23 K6860550...
Page 5 DODGE AVENGER / CHRYSLER SEBRING NOTE: ELEMENT MUST BE CENTERED ON SEAT. SPACING BETWEEN EDGE OF ELEMENT AND INNER RIDGE OF CUSHION/PAD MUST BE EQUAL TO OPPOSITE SIDE. REMOVE ADHESIVE BACKING PRIOR TO INSTALLATION 1/2" 9-29-08 4 of 23 K6860550...
Page 6 NOTE: ELEMENT MUST BE CENTERED ON SEAT. SPACING BETWEEN EDGE OF ELEMENT AND INNER RIDGE OF CUSHION/PAD MUST BE EQUAL TO OPPOSITE SIDE. REMOVE ADHESIVE BACKING PRIOR TO INSTALLATION NOTE: USE ITEM H TO TIE STRAP AS NEEDED. 9-29-08 5 of 23 K6860550...
Page 7 DODGE AVENGER / CHRYSLER SEBRING SEBRING ONLY AVENGER ONLY AVENGER ONLY SEBRING ONLY SEBRING ONLY 10mm 9-29-08 6 of 23 K6860550...
Page 8 DODGE AVENGER / CHRYSLER SEBRING SEBRING ONLY 10mm AUTOMATIC TRANSMISSION SEBRING ONLY SEBRING ONLY AUTOMATIC TRANSMISSION START SEBRING ONLY MANUAL TRANSMISSION SEBRING ONLY 9-29-08 7 of 23 K6860550...
Page 9 DODGE AVENGER / CHRYSLER SEBRING REPEAT STEPS 2 - 18, 29 FOR OPPOSITE SIDE CENTER SEBRING ONLY TEMPLATE ONTO BEZEL. SEBRING ONLY 9-29-08 8 of 23 K6860550...
Page 10 DODGE AVENGER / CHRYSLER SEBRING SEBRING ONLY SEBRING ONLY AVENGER ONLY CENTER TEMPLATE ONTO BEZEL. 9-29-08 9 of 23 K6860550...
Page 11 DODGE AVENGER / CHRYSLER SEBRING AVENGER ONLY AVENGER ONLY AVENGER ONLY 9-29-08 10 of 23 K6860550...
Page 12 DODGE AVENGER / CHRYSLER SEBRING NOTE: USE ITEM H TO TIE STRAP AS NEEDED. NOTE: USE ITEM H TO TIE STRAP AS NEEDED. DRIVER PASS NOTE: REVERSE REMOVAL STEPS 1-10,12-14, 19-28 FOR RE-INSTALLATION 9-29-08 11 of 23 K6860550...
Page 13 DEL COJÍN DEBE SER IGUAL EN EL LADO OPUESTO. 11,16 REMOVE ADHESIVE BACKING PRIOR TO INSTALLATION ENLEVER L’ADHÉSIF AVANT INSTALLATION VOR EINBAU SELBSTKLEBE-ABDECKFOLIE ENTFERNEN PRIMA DELL’INSTALLAZIONE, RIMUOVERE IL DORSO ADESIVO RETIRE EL SOPORTE ADHESIVO ANTES DE LA INSTALACIÓN 9-29-08 12 of 23 K6860550...
Page 14 POUR LA REINSTALLATION WICHTIG: ZUM EINBAUABSCHLUSS SCHRITTE 1-10, 12-14, 19-28 UMKEHREN NOTA: PER LA REINSTALLAZIONE, INVERTIRE I PASSAGGI RELATIVI ALLA RIMOZIONE 1-10, 12-14, 19-28 NOTA: PASOS REVERSOS 1-10, 12-14, 19-28 DEL RETIRO PARA LA REINSTALACIÓN 9-29-08 13 of 23 K6860550...
Page 15 JEEP LIBERTY / DODGE NITRO 18mm Torque to 32 ft-lbs Torque to 30 ft-lbs for re-installation for re-installation 18mm Torque to 32 ft-lbs for re-installation 9-29-2008 14 of 23 K6860550...
Page 16 JEEP LIBERTY / DODGE NITRO NOTE: USE ITEM L TO REINSTALL 9-29-2008 15 of 23 K6860550...
Page 17 Note: Element must be centered backing on seat. Spacing between edge of element and inner ridge of prior to min 1 cm cushion/pad must be equal to installation opposite side. FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION 9-29-2008 16 of 23 K6860550...
Page 18 JEEP LIBERTY / DODGE NITRO FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION 9-29-2008 17 of 23 K6860550...
Page 19 Spacing between edge of element and inner ridge of cushion/pad must be equal to opposite side. Remove adhesive backing prior to installation FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION 9-29-2008 18 of 23 K6860550...
Page 20 JEEP LIBERTY / DODGE NITRO Repeat steps 2 - 23 for NOTE: USE ITEM J TO TIE STRAP AS NEEDED opposite side 9-29-2008 19 of 23 K6860550...
Page 21 JEEP LIBERTY / DODGE NITRO NOTE: REPEAT FOR OPPOSITE SIDE 9-29-2009 20 of 23 K6860550...
Page 22 JEEP LIBERTY / DODGE NITRO DRIVER PASS Center template onto bezel. NOTE: REVERSE STEPS 22, 23, 15 -17 AND 1-9 FOR RE- INSTALLATION 9-29-2008 21 of 23 K6860550...
Page 23 Quite el forro adhesivo antes de la instalación Entfernen Sie anhaftenden Schutzträger vor Installation Rimuova la protezione adesiva prima dell'installazione 13-17,20-22 Pliez L'Option Plate De Siège Doble La Opción Plana Del Asiento Falten Sie Flache Sitzwahl Pieghi L'Opzione Piana Della Sede 9-29-2008 22 of 23 K6860550...
Page 24 Note : Étapes renversées 22, 23, 15-17 et 1-9 pour la réinstallation Nota: Pasos reversos 22, 23, 15-17 y 1-9 para la reinstalación Anmerkung: Rückschritte 22, 23, 15-17 und 1-9 für Wiedereinbau Nota: Punti d'inversione 22, 23, 15-17 e 1-9 per reinstallazione 9-29-2008 23 of 23 K6860550...
Page 25 DODGE CALIBER - DODGE JOURNEY JEEP COMPASS - JEEP PATROIT Front Heated Seats PRINT BACK TO CONTENTS CALIBER / COMPASS / PATRIOT ....................PG 2-11 JOURNEY .............................PG 12-22 T-20 T-47 T-50 10mm 15mm 18mm 1/8" 9-23-08 1 of 24 K6860725...
Page 26 CALIBER / COMPASS / PATRIOT TORQUE TO 30 ft-lbs (40 N.m) TORQUE TO 40 ft-lbs (55 N.m) FOR RE-INSTALLATION FOR RE-INSTALLATION 15mm T-50 PATRIOT/COMPASS/CALIBER 15mm TORQUE TO 40 ft-lbs (55 N.m) FOR RE-INSTALLATION 9-23-08 2 of 24 K6860725...
Page 27 CALIBER / COMPASS / PATRIOT T-50 TORQUE TO 30 ft-lbs (40 N.m) FOR RE-INSTALLATION T-20 9-23-08 3 of 24 K6860725...
Page 28 CALIBER / COMPASS / PATRIOT “USE ITEM “L” TO REINSTALL NOTE: ELEMENT MUST BE CENTERED ON SEAT. SPACING BETWEEN EDGE OF ELEMENT AND INNER RIDGE OF CUSHION/PAD MUST BE EQUAL TO OPPOSITE SIDE. REMOVE ADHESIVE BACKING PRIOR TO INSTALLATION 1/2" NON FOLD FLAT NON FOLD FLAT SEAT OPTION...
Page 29 CALIBER / COMPASS / PATRIOT FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION 9-23-08 5 of 24 K6860725...
Page 30 CALIBER / COMPASS / PATRIOT FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION 9-23-08 6 of 24 K6860725...
Page 31 CALIBER / COMPASS / PATRIOT NOTE: ELEMENT MUST BE CENTERED ON SEAT. SPACING BETWEEN EDGE OF ELEMENT AND INNER RIDGE OF CUSHION/PAD MUST BE EQUAL TO OPPOSITE SIDE. REMOVE ADHESIVE BACKING PRIOR TO INSTALLATION NON FOLD FLAT NOTE: USE ITEM J TO TIE STRAP AS NEEDED. SEAT OPTION NON FOLD FLAT SEAT OPTION...
Page 32 CALIBER / COMPASS / PATRIOT FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION NOTE: USE ITEM H TO TIE STRAP AS NEEDED. NOTE: VERIFY MOTION OF SEAT FUNCTION FOLD FLAT SEAT OPTION NOTE: USE ITEM H TO TIE STRAP AS NEEDED. 9-23-08 8 of 24 K6860725...
Page 33 CALIBER / COMPASS / PATRIOT REPEAT STEPS 34 FOR OPPOSITE SIDE 9-23-08 9 of 24 K6860725...
Page 34 CALIBER / COMPASS / PATRIOT CENTER TEMPLATE ONTO BEZEL. 9-23-08 10 of 24 K6860725...
Page 35 CALIBER / COMPASS / PATRIOT NOTE: USE ITEM H TO TIE STRAP AS NEEDED. NOTE: USE ITEM H TO TIE STRAP AS NEEDED. DRIVER PASS NOTE: REVERSE REMOVAL STEPS 1-12, 14-21, 30-33 FOR RE-INSTALLATION PG 23 9-23-08 11 of 24 K6860725...
Page 36 JOURNEY TORQUE TO 30 ft-lbs (40 N.m) TORQUE TO 40 ft-lbs (55 N.m) FOR RE-INSTALLATION FOR RE-INSTALLATION 15mm T-47 TORQUE TO 40 ft-lbs (55 N.m) FOR RE-INSTALLATION 15mm 9-23-08 12 of 24 K6860725...
Page 37 JOURNEY T-47 TORQUE TO 30 ft-lbs (40 N.m) FOR RE-INSTALLATION NON FOLD FLAT T-20 SEAT OPTION NON FOLD FLAT SEAT OPTION 9-23-08 K6860725 13 of 24...
Page 38 JOURNEY NON FOLD FLAT SEAT OPTION “USE ITEM “L” TO REINSTALL FOLD FLAT OPTION FOLD FLAT OPTION WITH STORAGE WITH STORAGE FOLD FLAT OPTION WITH STORAGE “USE ITEM “L” TO REINSTALL 9-23-08 K6860725 14 of 24...
Page 39 JOURNEY NOTE: ELEMENT MUST BE CENTERED ON SEAT. SPACING BETWEEN EDGE OF ELEMENT AND INNER RIDGE OF CUSHION/PAD MUST BE EQUAL TO OPPOSITE SIDE. REMOVE ADHESIVE BACKING PRIOR TO INSTALLATION 1/2" FOLD FLAT OPTION WITH STORAGE 3/8 " NON FOLD FLAT NON FOLD FLAT SEAT OPTION SEAT OPTION...
Page 40 JOURNEY NON FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION 16 of 24 9-23-08 K6860725...
Page 41 JOURNEY FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION FOLD FLAT SEAT OPTION 17 of 24 9-23-08 K6860725...
Page 42 JOURNEY FOLD FLAT OPTION WITH STORAGE NOTE: ELEMENT MUST BE CENTERED ON SEAT. SPACING BETWEEN EDGE OF ELEMENT AND INNER RIDGE OF CUSHION/PAD MUST BE EQUAL TO OPPOSITE SIDE. REMOVE ADHESIVE BACKING PRIOR TO INSTALLATION NON FOLD FLAT SEAT OPTION NOTE: USE ITEM J TO TIE STRAP AS NEEDED.
Page 43 JOURNEY NOTE: USE ITEM J TO TIE STRAP AS NEEDED. NON FOLD FLAT SEAT OPTION FOLD FLAT OPTION WITH STORAGE REPEAT STEPS 2 - 29 FOR OPPOSITE SIDE NOTE: USE ITEM J TO TIE STRAP AS NEEDED. FOLD FLAT OPTION WITH STORAGE 9-23-08 K6860725...
Page 44 JOURNEY NOTE: USE ITEM H TO TIE STRAP AS NEEDED. FOLD FLAT OPTION WITH STORAGE NOTE: VERIFY MOTION OF SEAT FUNCTION FOLD FLAT OPTION WITH STORAGE NOTE: USE ITEM H TO TIE STRAP AS NEEDED. FOLD FLAT OPTION WITH STORAGE NOTE: USE ITEM H TO TIE STRAP AS NEEDED.
Page 45 JOURNEY 10mm REPEAT STEP 38 FOR OPPOSITE SIDE CENTER TEMPLATE ONTO BEZEL. 9-23-08 21 of 24 K6860725...
Page 46 JOURNEY NOTE: USE ITEM H TO TIE STRAP AS NEEDED. NOTE: REVERSE REMOVAL STEPS 1-26,36-37 FOR DRIVER RE-INSTALLATION PASS PG 23 9-23-08 22 of 24 K6860725...
Page 47 FRONT HEATED SEATS SIÈGES AVANT CHAUFFANT HEIZUNG VORDERSITZE SEDILI ANTERIORI RISCALDATI 4,5 TORQUE TO 40 ft-lbs (55NM) FOR RE-INSTALLATION 4,5 CLÉ DYNAMOMÈTRIQUE DE 40 ft-lbs (55NM) POUR LA RÉINSTALLATION DREHMOMENT FÜR WIEDEREINBAU 40 ft-lbs (55NM) COPPIA DI SERRAGGIO FINO A 55 NM PER LA REINSTALLAZIONE APRIETE A 40 ft-lbs (55NM) PARA LA REINSTALACIÓN 3,8 TORQUE TO 30 ft-lbs (40NM) FOR RE-INSTALLATION 3,8 CLÉ...
Page 48 28,29,41,43 NOTE: USE “ITEM H” TO TIE STRAP AS NEEDED. 33,34,35,45 NOTE : UTILISER “L’ÉLÉMENT “H” POUR RESSERER LA LANIÈRE SELON LES BESOINS. WICHTIG: MIT “TEIL H” NACH BEDARF FIXIEREN. NOTA: SE NECESSARIO, USARE LA FASCETTA FERMACAVO, “ARTICOLO H”. NOTA: USE EL ARTÍCULO “H” PARA AJUSTAR LO NECESARIO EL AMARRE. 25,35 REPEAT STEPS 2-24,34/2-29,38 FOR OPPOSITE SIDE 30,39 RÉPÉTER LES ÉTAPES 2-24,34/2-29,38 POUR L’AUTRE CÔTÉ...
Page 49 CHARGER, MAGNUM, 300 C Heated Seat PRINT BACK TO CONTENTS 15mm 1/8" 13mm 3-20-2007 1 of 9 K6860285...
Page 50 Torque to 32 ft-lbs 13mm 13mm for re-installation Torque to 32 ft-lbs for re-installation Torque to 32 ft-lbs for re-installation 3-20-2007 2 of 9 K6860285...
Page 51 NOTE: USE ITEM L TO REINSTALL 3-20-2007 3 of 9 K6860285...
Page 52 Remove adhesive Note: Element must be centered backing on seat. Spacing between edge prior to of element and inner ridge of min 1 cm cushion/pad must be equal to installation opposite side. 3-20-2007 4 of 9 K6860285...
Page 53 Note: Element must be centered on seat. Spacing between edge of element and inner ridge of cushion/pad must be equal to opposite side. Remove adhesive backing prior to installation NOTE: USE ITEM J TO TIE STRAP AS NEEDED 3-20-2007 5 of 9 K6860285...
Page 54 Repeat steps 2 - 15 for opposite side 3-20-2007 6 of 9 K6860285...
Page 55 Center template onto bezel. Note: Repeat Note: Repeat on on opposite opposite side side Note: Repeat on Note: Repeat on opposite side opposite side Remove adhesive backing prior to installation Note: Repeat Note: Repeat on on opposite opposite side side 3-20-2007 7 of 9 K6860285...
Page 56 PASS DRIVER DRIVER E PASS 3-20-2007 8 of 9 K6860285...
Page 57 NOTE: REVERSE STEPS 16-18,11 AND 1-9 FOR RE-INSTALLATION NOTE: CYCLE ASHTRAY TO CONFIRM NO OBSTRUCTIONS. 3-20-2007 9 of 9 K6860285...
Page 58 Couple à 32 pi-livres pour la reinstallation Esfuerzo de torsión a 32 pie-libras para la reinstalación Drehkraft zu 32 Ftlbs für Wiedereinbau Coppia di torsione a 32 ft-libbre per reinstallazione Note : Employez l'article L pour réinstaller Nota: Utilice el artículo L para reinstalarse Anmerkung: Benutzen Sie Einzelteil L, um wieder zu installieren Nota: Usi l'articolo L per reinstallare 10,13 Note : L'élément doit être porté...
Page 59 21-26 Note : répétition pour le côté opposé Nota: repetición para el lado opuesto Anmerkung: Wiederholung auf gegenüberliegender Seite Nota: Ripetizione dal lato opposto Enlevez le support adhésif avant l'installation Quite el forro adhesivo antes de la instalación Entfernen Sie anhaftenden Schutzträger vor Installation Rimuova la protezione adesiva prima dell'installazione Conducteur Conductor...
Page 60 JEEP GRAND CHEROKEE BACK TO CONTENTS Front and / or Rear Heated Seat JEEP COMMANDER PRINT Front Heated Seat Front 2x Front 2x Front 1x Rear 2x Rear 2x Rear 1x Front 1x Front 1x Front 2x Rear 1x Rear 2x Front 1x Front 1x Rear 1x...
Page 61 NOTE: REPEAT FOR OPPOSITE SIDE 15mm T orque to 32 ft-lbs for re-installation T orque to 32 ft-lbs for re-installation FRONT & REAR SEAT KITS FRONT SEAT KIT FRONT SEAT KIT 15mm front of vehicle T orque to 32 ft-lbs for re-installation FRONT &...
Page 62 NOTE: USE ITEM O TO REINSTALL FRONT SEAT KIT FRONT SEAT KIT Note: Element must be centered on seat. Spacing between edge of element and inner ridge of cushion/pad must be equal to opposite side. Remove adhesive backing prior to installation Note: Element must be centered FRONT SEAT KIT on seat.
Page 63 NOTE: USE ITEM J TO TIE STRAP AS NEEDED FRONT SEAT KIT FRONT SEAT KIT REAR SEAT KIT 3-30-2007 4 of 12 K6860444...
Page 64 REAR SEAT KIT REAR SEAT KIT REAR SEAT KIT 2” REAR SEAT KIT REAR SEAT KIT 3-30-2007 5 of 12 K6860444...
Page 65 REAR SEAT KIT REAR SEAT KIT Remove adhesive backing prior to installation Note: Element must be centered on seat. Spacing between edge of element and inner ridge of cushion/pad must be equal to opposite side. Note: Element must be centered on seat.
Page 66 REAR SEAT KIT REAR SEAT KIT front of vehicle REAR SEAT KIT REAR SEAT KIT Repeat steps 2 - 25 for opposite side 3-30-2007 7 of 12 K6860444...
Page 67 FRONT & REAR SEAT KITS FRONT & REAR SEAT KITS FRONT & REAR SEAT KITS FRONT & REAR SEAT KITS Repeat for other side front of vehicle FRONT SEAT KIT 3-30-2007 8 of 12 K6860444...
Page 68 PASS DRIVER LEFT DRIVER REAR RIGHT REAR REAR SEAT KIT FRONT SEAT KIT PASS FRONT SEAT KIT FRONT SEAT KIT Rear Front FRONT AND REAR KIT COMBINATION FRONT OR REAR KIT ONLY 3-30-2007 9 of 12 K6860444...
Page 69 Repeat for other side Repeat for other side FRONT SEAT KIT Repeat for other side FRONT SEAT KIT FRONT SEAT KIT Repeat for Repeat for other side other side FRONT SEAT KIT FRONT SEAT KIT Repeat for other side REAR SEAT KIT FRONT SEAT KIT 3-30-2007 10 of 12...
Page 70 REAR SEAT KIT REAR SEAT KIT REAR SEAT KIT REAR SEAT KIT REAR SEAT KIT REAR SEAT KIT REAR SEAT KIT Center template onto bezel. 3-30-2007 11 of 12 K6860444...
Page 71 REAR SEAT KIT NOTE: REVERSE STEPS 43, 30-27, 23-22, 19, 16-12 AND 7-1 FOR RE-INSTAL- LATION REAR SEAT KIT 3-30-2007 12 of 12 K6860444...
Page 72 A,B,C,D,M,N,J,O avant arrière frente parte posterior Vorderseite Hinterseite parte anteriore parte posteriore avant arrière (plus court) (plus longtemps) frente parte posterior (más corto) (más de largo) Vorderseite Hinterseite parte anteriore parte posteriore F,H,K arrière parte posterior Hinterseite parte posteriore G,I,L avant Frente Vorderseite...
Page 73 8,9,18,20 Note : L'élément doit être porté sur le siège. L'espacement entre le bord de l'élément et l'arête intérieure de cushion/pad doit être égal au côté opposé. Nota: El elemento se debe centrar en asiento. El espaciamiento entre el borde del elemento y el canto interno de cushion/pad debe ser igual al lado opuesto.
Page 74 2006-2008 DODGE RAM - CLOTH BUCKET SEATS ONLY 2009 DODGE RAM - CLOTH & LEATHER BUCKET SEATS Front Heated Seats PRINT BACK TO CONTENTS T-50 T-20 15mm 18mm 1/8" K6860447 5-27-08 1 of 13...
Page 75 2006-2008 TORQUE TO 45 ft-lbs (61 N.m) FOR RE-INSTALLATION 15mm 2006-2008 TORQUE TO 30 ft-lbs (40 N.m) 2006-2008 FOR RE-INSTALLATION 18mm T-50 TORQUE TO 45 ft-lbs (61 N.m) FOR RE-INSTALLATION 2006-2008 2006-2008 5-27-08 2 of 13 K6860447...
Page 76 2006-2008 2006-2008 2009 TORQUE TO 45 ft-lbs (61 N.m) 2009 FOR RE-INSTALLATION 18mm 15mm TORQUE TO 45 ft-lbs (61 N.m) FOR RE-INSTALLATION 2009 TORQUE TO 30 ft-lbs (40 N.m) FOR RE-INSTALLATION 2009 5-27-08 3 of 13 K6860447...
Page 77 2009 2009 “USE ITEM “L” TO REINSTALL 5-27-08 4 of 13 K6860447...
Page 78 2009 NOTE: ELEMENT MUST BE CENTERED ON SEAT. SPACING BETWEEN EDGE OF ELEMENT AND INNER RIDGE OF CUSHION/PAD MUST BE EQUAL TO OPPOSITE SIDE. REMOVE ADHESIVE BACKING PRIOR TO INSTALLATION min 1 cm 5-27-08 5 of 13 K6860447...
Page 79 NOTE: ELEMENT MUST BE CENTERED ON SEAT. SPACING BETWEEN EDGE OF ELEMENT AND INNER RIDGE OF CUSHION/PAD MUST BE EQUAL TO OPPOSITE SIDE. REMOVE ADHESIVE BACKING PRIOR TO INSTALLATION NOTE: USE ITEM J TO TIE STRAP AS NEEDED. 5-27-08 6 of 13 K6860447...
Page 80 NOTE: FOR EASE IN INSTALLATION CARPET CAN BE PULLED OUT. 2009 2009 2009 2009 TORQUE TO 30 ft-lbs (40 N.m) FOR RE-INSTALLATION 5-27-08 7 of 13 K6860447...
Page 81 2006-2008 REPEAT STEPS 2 - 8, 15 - 24, 26 FOR OPPOSITE SIDE 2006-2008 2006-2008 CENTER TEMPLATE ONTO BEZEL. 2006-2008 2006-2008 5-27-08 8 of 13 K6860447...
Page 82 2006-2008 2006-2008 2009 2009 T-20 7 mm AUTOMATIC WITH CENTER CONSOLE AUTOMATIC WITH CENTER CONSOLE 2009 2009 T-20 7 mm AUTOMATIC WITHOUT CENTER CONSOLE AUTOMATIC WITHOUT CENTER CONSOLE 5-27-08 9 of 13 K6860447...
Page 83 2009 2009 7 mm 7 mm AUTOMATIC WITHOUT CENTER CONSOLE AUTOMATIC WITHOUT CENTER CONSOLE 2009 2009 1.5” CENTER TEMPLATE MANUAL TRANSMISSION ONTO BEZEL. 2009 2009 5-27-08 10 of 13 K6860447...
Page 84 2009 2009 PASS DRIVER DRIVER PASS NOTE: REVERSE REMOVAL STEPS 44-39, 32, 30-25, 19-1 FOR RE-INSTALLATION 11 of 13 5-27-08 K6860447...
Page 85 FRONT HEATED SEATS SIÈGES AVANT CHAUFFANT HEIZUNG VORDERSITZE SEDILI ANTERIORI RISCALDATI 2,3,9,10 TORQUE TO 45 ft-lbs (61NM) FOR RE-INSTALLATION CLÉ DYNAMOMÈTRIQUE DE 45 ft-lbs (61NM) POUR LA RÉINSTALLATION DREHMOMENT FÜR WIEDEREINBAU 45 ft-lbs (61NM) COPPIA DI SERRAGGIO FINO A 61 NM PER LA REINSTALLAZIONE APRIETE A 45 ft-lbs (61NM) PARA LA REINSTALACIÓN 4,11 TORQUE TO 30 ft-lbs (40NM) FOR RE-INSTALLATION CLÉ...
Page 86 23 NOTE: USE “ITEM J” TO TIE STRAP AS NEEDED. NOTE : UTILISER “L’ÉLÉMENT “J” POUR RESSERER LA LANIÈRE SELON LES BESOINS. WICHTIG: MIT “TEIL J” NACH BEDARF FIXIEREN. NOTA: SE NECESSARIO, USARE LA FASCETTA FERMACAVO, “ARTICOLO J”. NOTA: USE EL ARTÍCULO “J” PARA AJUSTAR LO NECESARIO EL AMARRE. 26 NOTE: FOR EASE IN INSTALLATION CARPET CAN BE PULLED OUT.
Page 87 JEEP WRANGLER Front Heated Seats PRINT BACK TO CONTENTS 9-27-07 K6869541...
Page 88 9-27-07 K6869541...
Page 89 9-27-07 K6869541...
Page 90 9-27-07 K6869541...
Page 91 9-27-07 K6869541...
Page 92 9-27-07 K6869541...
Page 93 9-27-07 K6869541...
Page 94 9-27-07 K6869541...
Page 95 9-27-07 K6869541...

Ce manuel est également adapté pour:

K6860725 K6860285 K6860444 K6860447 K6869541