Publicité
18
48. Obtain the supplied WCM (1 and 3) from the kit and
connect the remote start antenna to the WCM (1 and
3).
49. Position the WCM (1 and 3) on the ignition lock hous
ing (5) and install the retaining screw on the top of the
ignition lock housing (5).
50. Connect the WCM electrical connector (4).
51. Connect the right stalk electrical connector (1) to the
SCCM (2).
52. Slide the right stalk (2) into the groove of the SCCM
(1) and install the one retaining screw (3).
Publicité
