Manuels Connexes pour Mopar 82212300
Sommaire des Matières pour Mopar 82212300
- Page 1 DODGE DURANGO Front End Cover INSTALLATION INSTRUCTION FRONT END COVER INSTRUCCIONES DE MONTAJE FUNDA DELANTERA NOTICE DE MONTAGE HOUSSE FRONTAL K6860935 03/16/2011 1 of 7...
- Page 2 No la seque a máquina! • Use Protector Mopar® del Vinilo (P/N 4318017) para guarder el color y el tratamiento. • Para obtener mejores resultados, instale la mascara con una temperatra ambiente de por lo menos 65º...
- Page 4 Note: If State or Province law requires use of a front license plate, remove solid flap from center of front end cover. Be careful to snip only the stitches located on the back of the license plate flap as shown on in detail.
- Page 6 K6860935 03/16/2011 6 of 7...
- Page 7 WARNING IF THIS COVER BECOMES DAMP OR WET, IT MUST BE REMOVED AND AL- LOWED TO DRY BEFORE REINSTALLATION. FAILING TO REMOVE A WET COVER AND ALLOWING IT TO DRY IN PLACE ON THE VEHICLE COULD RESULT IN PAINT DAMAGE. SHOULD PAINT DAMAGE (i.e FOGGING) OCCUR, REFER YOUR DEALER TO TECHNICAL SERVICE BULLETIN #23-55-00.