Publicité
30. If equipped, remove the compass module (1) from the
mounting tabs located near the top center of the I/P.
Do not disconnect the compass module.
31. Install the remote start antenna (1) into the mounting
tabs located near the passenger side door.The
remote start antenna must be installed with it's
label facing up and the harness facing towards
the driver side of the vehicle.
32. Begin routing the remote start antenna harness
towards the driver side of the vehicle.
33. Attach the PIA edge biter clip (1) to the I/P just under
the compass module tab.
34. Attach the tie wrap (2) to the compass module
mounting location. Clip the excess off the end of the
tie wrap.
15
Publicité
