Télécharger Imprimer la page

Tornado BD 30/20 Manuel D'exploitation Et D'entretien page 38

Publicité

TRANSPORT AND STORAGE
Splash Guard Replacement
1. Unscrew the knobs in the rear part of the brushes base group from the
extremity of the metal strips. The operation has to be carried out on both splash
guards.
2. Unscrew the nut on the front part of the brushes base group and take off the
metal strips.
3. Replace the splash guard rubbers and follow the assembling instructions
under "SPLASH GUARD ASSEMBLY" paragraph.
With the brush assembled, the splash guard must slightly touch the floor.
Transport
Do not strike shelvings or scaffoldings where there is danger of falling objects.
Leaving the machine in parking position, remove the key and set the parking brake.
Do not use the machine as a means of transport.
Adjust the working speed to the surface conditions; particularly, slow down before
narrow curves have to be faced.
Storage and Disposal
Storage temperature: between 32°F and 131°F (0°C and +55°C).
Perfect operating temperature: between 32°F and 104°F (0°C and +40°C).
The humidity should not exceed 95%.
Provide for the scrapping of the material of normal wear following strictly the
respective rules.
When your machine has to stop activity, provide for the appropriate waste
disposal of its materials, especially oils, batteries and electronic components, and
considering that the machine itself has been, where possible, constructed using
recyclable materials.
Store machine in a dry, indoor area only.
36

Publicité

loading

Ce manuel est également adapté pour:

Ts530-w30-u