Publicité
CONTROLS
General Setting
To enter the menu for the setting, use the keyboard of the instrument board and
proceed as follows:
1. Keep the buttons (1) and (5) pressed simultaneously.
2. Turn the key to switch on the machine.
3. When "ID CHECK" is shown on the display, press the enter button (2).
Once entered in GENERAL SETTING it will be possible to change the following
default settings by simply scrolling through the menu using buttons (1) and (4).
Display Language Selection
English is the default language; it is possible to change it into Italian.
To select the language just visualize first "Language", then select it scrolling with
the buttons (3) and (5).
Once the language is chosen, confirm using button (2).
To Change The Battery Setting
Once entered "General Setting", it is possible to set the machine depending on the
batteries installed (AGM / GEL / LEAD-ACID).
To select the proper setting, just visualize first "BATTERY", then select it by scrolling
with the buttons (3) and (5).
Once the setting is chosen, confirm using button (2).
20
Publicité
