Publicité
CLEANING
Cleaning Of The Solution Tank
1. Bring the machine to an appropriate place for the detergent solution draining.
2. Unscrew the solution tank cap.
3. Unscrew the cap of the solution filter (1) so that the detergent solution flows
out into appropriate containers.
4. Rinse the tank with a water jet
5. Reassemble all parts.
Monthly Maintenance Check And Replacement
Front Squeegee Rubber
Check the wear of the squeegee rubber and eventually replace it.
For the replacement it is necessary to:
1. Take off the squeegee (see under paragraph "SQUEEGEE CLEANING").
2. Disassemble the rear part of the squeegee (see under paragraph "REAR
SQUEEGEE RUBBER CHECK").
3. Unscrew the wing nuts (1) and take off the front rubber holder blade (2).
4. Replace the front rubber (3).
Do not wash the hose that goes from the suction motor to the
recovery tank in this manner.
34
Publicité
