Publicité
ASSEMBLY
Screw down the knobs in the rear part of the cover in the free end of the metal
strips. The operation has to be carried out for each splash guards. With the brushes
assembled, the splash guard must slightly touch the floor.
Brushes Assembly
To assemble the brushes, proceed as follows:
1. Switch on the machine turning the key (1) clockwise.
2. Press the push button (2) of up/down of the brushes base to lift the brushes.
3. Switch the machine OFF by turning the key (1) counterclockwise.
With the brushes base group in lifted position, insert the brushes into their plate
seat underneath the brushes base turning them until the three metal buttons are
properly seated in their slots; quickly rotate the brushes to push the button towards
the coupling spring until they get locked. The figure shows the rotating direction for
brushes coupling.
16
Publicité
