Publicité
4. Press the solenoid valve push button (4); the solenoid valve symbol
changes from closed to open.
5. Lower the brushes base onto the floor by pressing the push button
(5); on the display shows first the down symbol and then the one of the
brushes motor activation.
6. Use the solution valve lever (6) open and adjust the detergent solution flow.
7. Models equipped with the 3S system (optional), it is necessary to press the
suitable push button to activate the detergent solution supply by choosing
between the traditional adjustment system through the solution valve or the
system of fixed optimum supply (see under "3S SYSTEM SOLUTION SAVING
SYSTEM").
8. Using the squeegee lifting lever (7) lower the squeegee.
9. Pushing on the levers drive control (8) the machine starts to move, the
brushes start to rotate and the water begins to flow automatically.
Releasing the drive control levers will stop the flow.
10. During the first meters check that the squeegee adjustment guarantees
a perfect drying action and that the detergent solution flow is appropriate. It
has to be sufficient to wet the floor uniformly without causing excess flow of
detergent from the splash guards. Always consider that the correct quantity of
solution detergent depends on the type of floor, dirtiness and machine speed.
Always use the lowest setting possible to get the desired results.
Movement And Speed Adjustment
The traction of the machine is provided through an electronically controlled motor.
To move the machine, turn the key (1) and then rotate the levers drive control
(2) placed on the handle bar, in forward for the forward drive, in reverse for the
backward drive. The control acts in a progressive way, therefore it is possible to
graduate the speed depending on each requirement rotating the levers to whatever
it is necessary.
Furthermore it is possible to adjust the maximum speed by pushing the push button
(3) to increase it and on the button (4) to decrease it.
OPERATION
25
Publicité
