Tornado BD 30/20 Manuel D'exploitation Et D'entretien page 37

To reassemble the squeegee reverse the steps above.
Splash Guard Replacement
1. Unscrew the knobs in the rear part of the brushes base group from
the extremity of the metal strips. The operation has to be carried out on
both splash guards.
2. Unscrew the nut on the front part of the brushes base group and take
off the metal strips.
3. Replace the splash guard rubbers and follow the assembling
instructions under "SPLASH GUARD ASSEMBLY" paragraph.
With the brush assembled, the splash guard must slightly touch the floor.
CLEANING
35