Publicité
OPERATION
The system is composed of a separate line parallel to the main solution line. It can
be enabled or disabled directly from the instrument panel by holding for about 3
seconds the push button (1).
When the system is on, the 3S symbol appears on the display as shown in the
picture.
Starting The Machine
Every control is observed on the display (1).
1. Turn the key (2) clockwise.
2. Check the battery type and the charge level on the display (1).
3. Press the suction motor push button (3); the suction motor symbol changes
from off to on and the motor starts.
24
Publicité
