SprayPack 18V
3 + 2 year guarantee on this WAGNER craftsman product
WAGNER exclusively provides the commercial buyer who has purchased the product from an authorised specialist
dealer (hereinafter referred to as the „Customer") with a warranty for the products listed on the Internet at https://
go.wagner-group.com/3plus2-info in addition to the statutory warranty regulations, unless there is a warranty exclusion.
The warranty period for WAGNER products (devices) in the craftsmen's sector is 36 months and begins with
the date of purchase of the initial purchase. This warranty period is extended by a further 24 months if the
product is registered within 28 days of purchase on the Internet at https://go.wagner-group.com/3plus2.
In cases of commercial rental, industrial use (e.g. use in shift operation) or equivalent use, the warranty period is 12 months due to
the significantly higher load. We reserve the right to carry out a check in individual cases and refuse the warranty where necessary.
If any material, machining or performance defects are identified in the device within the warranty period, then the
warranty claims must be made immediately and within a period of no more than 2 weeks following discovery of the defect.
The detailed guarantee conditions can be obtained on request from our authorised WAGNER partners (see website or operating
instructions) or in text form on our website:
https://go.wagner-group.com/pf-warranty-conditions
Environmental protection
At the end of its service life, the appliance, including accessories and packaging, must be recycled in an environmentally
friendly manner. Separate packaging materials by type and put them in the recyclables collection. Old appliances and
rechargeable batteries/batteries must not be disposed of with household waste. Help protect the environment by taking the
appliance and the battery to a local disposal point, contact our customer service team or make enquiries at a specialist shop.
Important Note regarding Product Liability!
According to an EU directive, the manufacturer is only liable without limitation for faults in the product if all parts come from the
manufacturer or have been approved by the manufacturer and have been mounted to the device and are operated properly. If
third-party accessories or spare parts are used, the manufacturer is exonerated wholly or partly from his/her liability if use of the
third-party accessories or spare parts have caused a defect in the product.
EU Declaration of conformity
We declare under sole responsibility that this product conforms to the following relevant stipulations:
2006/42/EC, 2014/30/EU, 2014/35/EU, 2011/65/EU, 2012/19/EU
Applied harmonised norms:
EN 62841-1, EN 50580, EN 60335-1, EN 60335-2-29, EN 62133-2, EN IEC 55014-1, EN IEC 55014-2, EN 62233, EN IEC 61000-3-2,
EN 61000-3-3
The EU declaration of conformity is enclosed with the product.
If required, it can be re-ordered using order number 2467859.
UKCA Declaration of conformity
We declare under sole responsibility that this product conforms to the following relevant regulations:
Supply of Machinery (Safety) Regulations 2018
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
The Waste Electrical and Electronic Equipment Regulations 2013
Applied harmonised standards
BS EN 62841-1, BS EN 50580, BS EN 62133-2, BS EN 60335-1, BS EN IEC 60335-2-29, BS EN IEC 55014-1, BS EN IEC 55014-2,
BS EN IEC 61000-3-2, BS EN 61000-3-3
- Modifications reserved -
EN
43