Publicité
EN
Tools needed for assembly
•
Two adjustable wrenches.
WARNING
Only insert the battery when the device is fully assembled.
Pressure gauge
Screw the pressure gauge to the
hose connection.
Hose
Screw the elbow onto the pressure
gauge.
Screw the high-pressure hose onto
the elbow.
Keep hold of the connection using
an adjustable spanner and tighten
the hose connection with another
spanner.
Spray Gun
Release the guard from the head of the
gun and unscrew the handle grip from
the head of the gun.
Insert the red gun filter with the conical
side upwards.
Reattach the handle grip and engage the
guard on the head of the gun.
If available, install swivel Z between gun and
If available, install swivel Z between gun and
i
hose.
hose.
Screw the thread at the other
end of the hose to the spray gun
connection. Keep hold of the spray
gun by applying an adjustable
spanner to the handle and tighten
the hose nut using another spanner.
30
ASSEMBLY
If the appliance will be carried like
a rucksack, open the hose holder
and hook in the rolled-up hose.
Carrying strap
Attach the carrying straps to the
quick-release fasteners at the top
of the device.
Hook the carrying straps onto
the bottom of the device.
Hang the device over your
shoulders and adjust the straps
to suit you.
If the device is tilted too much
(e.g. when bending forwards),
an acoustic signal sounds.
SprayPack 18V
Publicité
