Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
1.5. Cable feed
Underground cables must be equipped with a protective
sheath with a sufficient diameter to contain the motor cable
and the accessories cables.
For overground cables, use a cable duct that will withstand
the weight of the vehicles (ref. 2400484).
1.6. Clothing precautions
Take off any jewellery (bracelet, chain, etc.) during installation.
For manoeuvring, drilling and welding operations, wear
appropriate protection (special glasses, gloves, ear protection,
etc.).
1.7. Safety instructions relating to installation
DANGER
Do not connect the motorisation to a power source before
installation is complete.
WARNING
Modifying any of the components in this kit or using ad-
ditional components not recommended in this manual is
strictly prohibited.
Monitor the gate as it moves and keep people away from it
until installation is complete.
Do not use adhesive to secure the motorisation.
WARNING
Take care when using the manual unlocking device. Man-
ual unlocking may result in uncontrolled movement of
the gate.
A er installation, ensure that:
• the mechanism is correctly adjusted
• the manual back release device is operating correctly
• the motorisation changes direction when the gate encoun-
ters an object 50 mm high positioned halfway up the leaf.
1.8. Regulations
Somfy declares that the product described in these instruc-
tions, when used in accordance with these instructions, com-
plies with the essential requirements of the applicable Euro-
pean directives and, in particular, with Machinery Directive
2006/42/EC.
The full text of the EC declaration of conformity is available on
the following website: www.somfy.com/ce. Antoine CREZE,
Head of Regulations, Cluses
1.9. Assistance
You may encounter difficulties or have questions when install-
ing your motorisation.
Do not hesitate to contact us; our specialists are on hand to
answer all your questions. Internet: www.somfy.com
4
2. PRODUCT PRESENTATION
2.1. Area of application
This motorisation is intended to motorise a hinged gate with the following
maximum dimensions for a single-family home:
Hinged gate
2.2. Composition of the standard pack - Fig. 1
Mark
Quantity
Motorisation
1
2
Axovia 200 motor
2
2
Motor arm
3
2
Gate leaf arm
4
2
Door bracket
5
2
Upper cover unlock key
6
2
Remote control*
Bag of accessories
7
1
Earth wire
8
2
Cable duct
9
4
Cable clamp
10
1 (2)
Screw joint
11
1
Insulated round terminal
12
1
Serrated washer, AZ4 Zn
13
1
Self-drilling screw, TCB-Z M4x8 Zn
14
8
Self-drilling screw, TCBL-Z M4x12 Zn
15
8
Flat washer
Bag of arm accessories
16
2
Upper stop block
17
2
Lower stop block
18
6
Stop block screw
19
2
Arm mounting screw, TH M12x50
20
4
Stop block cover screw
21
2
Gate leaf bracket long sha
22
4
Gate leaf arm ring
23
2
Gate leaf arm damper
24
2
Motor arm short sha
25
2
Lower stop block cover
26
2
Upper stop block cover
* the contents may vary depending on the packs
2.3. General motor space requirements - Fig. 2
2.4. General view of a standard installation - Fig. 3
3. PRE INSTALLATION CHECKS
3.1. Gate
The gate must be in good condition: ensure that its structure is suitable for
automatic control and that it conforms to the relevant standards.
The gate must remain horizontal throughout its travel, and must open and
close manually with ease.
Maximum gate
Maximum gate
leaf weight
leaf width
200 kg
2 m
Description
Copyright
©
2018 SOMFY ACTIVITES SA. All rights reserved.
AXOVIA 3S
Publicité
Table des Matières
