Télécharger Imprimer la page

Husqvarna YT150 Manuel D'instructions page 40

Masquer les pouces Voir aussi pour YT150:

Publicité

Eng) Cutting tips
O Clear the lawn from stones and other objects which can be
thrown away by the blades.
_
@ Localize and mark stones and other fixed objects to avoid
collision.
@ Begin with a high cutting height and reduce until the
required cutting result is obtained.
@ The cutting result is best with high engine speed (blades
rotate quickly) and low gear (machine goes slowly). If the .
grass is too long and thick the drive speed can be increased
by selecting a higher gear or reducing the motor speed,
without affecting the cutting result.
|
9 The best lawn is achieved if the grass is cut often. Cutting
becomes more even and the cut grass is more evenly
distributed over the surface. Total time taken is not greater,
since higher drive speed can be selected SIE? affecting
the cutting results.
@ Avoid cutting wet grass. The cutting results will be worse
since the wheels will sink into the soft fawn.
@ Spray the cutting unit with water undemeath after use.
40
Move the throttle control to full speed (ës), Choose a driving
speed which suits the terrain and required cutting results.
(p) Den Gashebel auf Vollgas (ën) stellen. Eine an das Gelände
und das.gewünschte MERO gebIio BIER Geschwindigkeit
wählen.
© Amener la commande d'accélérateur en position d'accélération
maximale CH
Choisir la vitesse appropriée au terrain et à la
coupe désirée.
€») Poner el acelerador en la posición de plenos gases (y). Elegir
la velocidad adecuada al terreno y al corte deseado.
Portare l'acceleratore sul massimo (y). Selezionare una
velocità di guida adeguata al terreno e al risultato di taglio
desiderato.
Zet de gashendel in de volgaspositie («&). Kies von rijsnelheid
die geschikt is voor het terrein en voor het gewenste
maairesultat.
(0) Ratschláge zum Rasenmühen
€ Steine und andere Gegenstánde vom Rasen entfemen, da
diese sonst von den Mähklingen weggeschleudert werden.
€ Große Steine und andere Gegenstände im Mähbereich
kennzeichnen, um ein Auffahren zu vermeiden.
€ Mit hoher Mähhöhe beginnen und diese dann senken, bis
das gewünschte Ergebnis erzielt wird.
€ Das Máhergebnis ist am besten mit hoher Motordrehzahl
- (die Klingen rotieren schnell) und niedrigem Gang (die
Maschine fährt langsam).
| Wenn das Gras nicht allzu hoch und dicht ist, kann die
Fahrgeschwindigkeit erhöht werden, indem ein höherer
Gang gewählt wird, oder man senkt die Motordrehzahl, ohne
dal3 das Mähergebnis merkbar schlechter wird.
O Der Rasen wird am schönsten, wenn er oft gemäht wird. Das
Gras wird dadurch gleichmäßiger gemäht und das gemähte
Gras wird gleichmäßiger über die Oberfläche verteilt. Der .
gesamte Zeitaufwand ist nicht größer, da eine höhere
Fahrgeschwindigkeit gewählt werden kann, ohne daß
schlechter gemáht wird.
€ Wenn möglich, keinen nassen Rasen mahen. Das Maher-
gebnis wird schlechter, da die Räder im weichen Rasen
einsinken.
O Nach jedem Einsatz ist das ME
von unten mit
Wasser abzuspülen.

Publicité

loading